Description
+ Wall-mounted design
+ Large capacity, high power output
+ Safest lithium iron phosphate battery cell with high energy density
+ 16 Units in parallel maxium
+ IP65 protection for both indoor and outdoor use
+ Support CAN & RS485 communication with mainstream inverters
+ Local monitoring via LCD monitor
+ Integrated battery management system (BMS)
Technical Data | LP28-48100 | LP28-48200 | |
Nominal Voltage | 51.2V | ||
Nominal Capacity | 100Ah | 200Ah | |
Nominal energy | 5120Wh | 10240Wh | |
Life Cycles | 6000 cycles @ 80% DOD, 25℃ | ||
Recommended Charge Voltage | 58.4V | ||
Recommended Charge Current | 50A | 100A | |
End Of Discharge Voltage | 44V | ||
Standard Method | Charge | 20A | 40A |
Discharge | 50A | 100A | |
Maximum Continuous Current | Charge | 100A | 100A |
Discharge | 100A | 100A | |
BMS Cut-Off Voltage | Charge | 58.4 V (3.65V/Cell) | |
Discharge | 44.0V (2.75V/Cell) | ||
Temperature | Charge | 0 ~ 45℃ | |
Discharge | -20 ~ 55 ℃ | ||
Storage Temperature | -5~35℃ | ||
Shipment voltage | ≥51.2V | ||
Module Parallel | Up to 16 units | ||
Communication | CAN2.0/RS232/RS485/WIFI | ||
Case Material | SPPC | ||
Machine Dimension (H*W*D) (mm) | 450*400*140 | 580*490*145 | |
N.W (kg) | 56 | 95 | |
* Variations in dimensions and weights may occur due to production batches. | |||
Charge Retention And Capacity Recovery Capability | Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90 | ||
Certification & Standards | CE-EMC (EN 61000-6-3: 2007+A1: 2011+AC: 2012 EN IEC 61000-6-1: 2019) IEC62619-1:2018; IEC62619:2022; IEC62619:2017; UN38.3/ MSDS |